Hi Fi Audio Amplifiers : Perreaux
The Perfect Recreation of a Musical Event


"AVP1" Dolby Digital®/DTS® Processor/Preamplifier
"AVP1P" Dolby Digital®/DTS® Processor/Preamplifier
"AVP1" Dolby Digital®/DTS® Processor/Preamplifier

"AVP1" Dolby Digital®/DTS® Processor/Preamplifier



The Perreaux "AVP1" is a



Processor/Preamplifier incorporating Dolby® Digital (AC-3®)



and DTS® surround technology.


  • Infrared Remote Control
  • Alphanumeric Display
  • Standby, Mute, Master Volume
  • Prologic Mode (On, Off, Auto)
  • Channel Volume Matching
  • Rear/Center Delay
  • Analog/Digital Input Select
  • Speaker Size Select
  • Subwoofer/Centre/Surround Switching

    		•

  • 3 Digital Inputs (Coaxial)
  • 1 Optical Digital Input (TOSLINK)
  • 4 pairs Unbalanced Audio Inputs (RCA)
  • 5.1 Audio Output (RCA)
  • 1 pair Unbalanced Line Outputs (RCA)
  • 4 Video Inputs (Composite/S-Video)
  • 2 Video Outputs (Composite/S-Video)
  • 3 Remote Trigger Outputs (5VDC)
    		•

  • Dolby® Digital (AC-3®) Decoding
  • DTS® Decoding
  • Dolby® Prologic®
  • Dynamic Range Compression
  • Test Tone
    		•




  • On Screen Display
  • Regulated Power Supplies for All Stages
  • Precision Analog Resistor-Ladder Volume Control
  • Input Switching via High Quality CMOS Switches
  • Composite and S-Video Switching

    		•

    Greek 'DVD Home Theatre' - AVP1 & 6160 (Δημήτρης Σταματάκος)   777 kB
    AVP1 Fact Sheet   77 kB
    AVP1 Product Manual   94 kB
    Australian 'Best Buys' - AVP1P & 6160P   85 kB
    Australian 'Audio & Video Lifestyle' - AVP1P & 6160P (Nic Tatham)   85 kB
    Australian 'Audio & Video Lifestyle' - AVP1P & 6160P (Best Buy Award 2003)   54 kB
     


    Rated Output:
      Analogue 1.5Vrms
      Video 1.0Vp-p
    Output Impedance:
      Analogue 1kΩ
      Video 75Ω
    Input Sensitivity:
      Analogue 200mVrms
      Digital 0.5Vp-p
      Video 1.0Vp-p
    Input Impedance:
      Analogue 22kΩ
      Digital 75Ω
      Video 75Ω
    Total Harmonic Distortion (THD+N):
      Analogue <0.04% @ 1kHz
      Digital <0.02% @ 1kHz
    Frequency Response:
      Analogue 20Hz-20kHz, +0dB -3dB
      Digital 20Hz-20kHz, +0dB -3dB
    Signal to Noise Ratio:
      Analogue 90dB
      Digital 90dB
    Power Consumption: 40W
    Dimensions (not including feet, terminals and handles):
      Width
      Height
      Depth
    482mm (19.0")
    88mm (3.5")
    315mm (12.4")
    Weight: 7.5kg (16.5lb)
     
     Home  About  Products  Details  Downloads  Press Room  How to Buy  Support  Contact
    © Perreaux : New Zealand