Hi Fi Audio Amplifiers : Perreaux
The Perfect Recreation of a Musical Event


"E160i" Stereo Integrated Amplifier
“E160i” Stereo Integrated Amplifier

"E160i" Stereo Integrated Amplifier

"E160i" Stereo Integrated Amplifier




The Perreaux "E160i" supplies superlative performance with minimal compromise. Incorporating the same features of both the "EP" preamplifier and "E160"



power amplifier. The "E160i", with 160 watts per channel, provides powerful and high quality sound. The unit features six inputs (one direct



for processor connection), two tape outputs, a preamplifier out and a main in, all via high quality gold plated connectors.


  • Infrared Remote Control
  • Front Panel User Interface
  • Alphanumeric Display
  • Earth Isolation Switch
  • Front Mounted Power Switch
  • Pre/Power Amplifier Separation Switch



  • 6 pairs Unbalanced Inputs (RCA)
  • 1 pair Unbalanced Preamplifier Outputs (RCA)
  • 2 pairs Unbalanced Line Outputs (RCA)
  • 2 pairs Gold Plated Speaker Binding Posts

  • 160W+160W into 8Ω
  • Input selection via high quality relays
  • Extremely stable, low-noise, digitally controlled, analogue volume control
  • Sophisticated imaging
  • Excellent dynamic range




  • Class A driver stage and Class A/AB output stage
  • High power MOSFET output
  • Large toroidal transformer and filter capacitors
  • Advanced design and rail fuses eliminates the noise and distortion of output short-circuit protection systems

  • E160i Fact Sheet   82 kB
    E160i Product Manual   449 kB
    US 'On Hi-Fi' - E160i & ECD2 (Wes Phillips)   53 kB
    E Series Brochure   516 kB
     


    Preamplifier Section
    Rated Output: 1.5Vrms
    Maximum Output: 3.0Vrms
    Input Sensivity: 205mV
    Input Overload: 4.0Vrms
    Input Impedance: 10kΩ
    Tape Output Level: 200mV
    Total Harmonic Distortion (THD+N):
     Rated Output <0.006%, 20Hz to 20kHz
    Signal to Noise Ratio: 95dB
    Phase Accuracy: ±1.0º, 20Hz to 20kHz
    Dynamic Range: 110dB
    Gain Range: -95dB to 17dB
    Gain Resolution: 1.5dB

    Poweramplifier Section
    Power Output (continuous, per channel): 160Wrms into 8Ω
    200Wrms into 4Ω
    Frequency Response: 20Hz to 20kHz, ±0.25dB
    Total Harmonic Distortion (THD+N):
     Typically 0.005% @ 1kHz into 8Ω
     20Hz to 20kHz <0.04% into 8Ω
    Hum & Noise (unweighted): -95dB, referenced to rated output
    Input Sensitivity: 1.3Vrms
    Gain: 28.6dB
    Input Impedance: 22kΩ
    Dynamic Headroom (rated with music): >1.9dB
    Maximum Current Output: 24A per channel
    Damping Factor: 500 @ 1kHz into 8Ω
    Driver Stage: Class A
    Output Stage: Class A/AB

    General
    Dimensions (not including feet, terminals and handles):
      Width
      Height
      Depth

    430mm (16.9")
    88mm (3.5")
    315mm (12.4")
    Weight: 10.0kg (22.0lb)
     
     Home  About  Products  Details  Downloads  Press Room  How to Buy  Support  Contact
    © Perreaux : New Zealand